Thanks for your patience as we are experiencing high order volume
Why do I need to clean my diving equipment after I go into the water?
Release time:
2023-02-15
With the continuous development of diving products and equipment and people's in-depth study of diving activities, diving slowly into our lives in a leisurely way. Long time use in seawater, it is necessary to regularly maintain, that diving equipment should be how to clean it?
Divers in completely clean water diving is relatively rare, so all diving equipment should be rinsed clean after use. Rinsing with clean water can remove sediment, mud and salt. These residual sediments will not only cause damage to the equipment, but also make the equipment look old. Salt for diving products and equipment is very harmful, salt will not only crystallize, but also accelerate the corrosion rate of steel, aluminum and bronze, if it is relatively sharp crystals will also pierce the airbag of the buoyancy adjustment device. Fortunately, most of the deposits can be removed by flushing with water; warm water flushing is more efficient than cold water flushing, but warm water is not available anywhere. If high pressure water is used to flush valves, regulators or instrument clusters, this will cause sediment to enter between the O-rings and metal plates, which will break the gap seal, so avoid using high pressure water to flush when cleaning.
If the diving equipment cannot be flushed immediately, it can be soaked in water for a period of time before flushing, and then placed under a water pipe or faucet to flush.
Real-time news
Join us on WhatsApp
Join us on WeChat
One Stop Solution for All Your Manufacturing, Trading & Sourcing Needs
2023 ATENOVO INDUSTRIAL CO., LTD. ALL RIGHTS RESERVED
51, Weiye Road, Shiqiao Town, Kaifa District, Yangzhou 225101 China